|
|
|
|
 |
|
|
|
ATxRail 0~10 V Temperature Transmitter |
View
Large
|
The ATxRail 0~10 V is a 2-wire DIN rail mount temperature transmitter, microprocessor based designed for the flexibility of accepting mV, Pt100 and a variety of thermocouples as the input sensor. The ATxRail delivers a scalable linear 0-10 Vdc output voltage proportional to the sensor temperature. User-friendly configuration software is provided for parameter setup, including sensor type, temperature range, filter, etc. |
 |
| Sensor Input | : | User defined. The supported sensors are listed in ATxRail Catalogue, Input Sensors, along with their maximum ranges.
| | Thermocouples | : | Types J, K, R, S, T, N, B and E according to IEC 60584 (ITS-90).
Impedance: 1 MΩ. | | Pt100 | : | Excitation: 180 µA.
2 or 3-wire connection ( for 2-wire sensors, tie terminals 2 or 3 together ).
α = 0.00385, according to IEC 60751 (ITS-90). | | Voltage | : | 0 ~ 50 mV DC.
Impedance: 1 MΩ. | | Total Accuracy | : | Better than 0.25% of the maximum range for Thermocouples and 0.15% for Pt100 and Voltage. | | Response Time | : | < 100 ms. | | Output | : | 0~10V dc, linear with respect to the measured temperature. | | Resolution | : | 0.025 V (12 bits). | | Power Supply | : | 18 to 30 Vdc, across the transmitter. | | Maximum Current (L) | : | 2 mA | | Operating Temperature | : | -40 to 85 °C. | | Humidity | : | 0 to 90%
RH. | | Electromagnetic compatibility | : | EN 50081-2, EN 50082-2. | Polarity
Inversion | : | Internal Protection. | | Isolation | : |
No isolation between the sensor and the 4-20mA loop. | | Misc. | : | Cold junction compensation for thermocouples. | | Housing | : | ABS Plastic. | | Dimensions | : | Refer to AtxRail Catalogue, Dimensions Section. |
|
 |
 [ATxRail_0to10V_Temperature_Transmitter.pdf]
|
 [ATxConfig_ABUSTEK_Software.zip]
|
|
|
|
